RGB Pixel LED Light Digital Cylinder Stack Lighting Matrix
FEL-V20 RGB Pixel LED Digital Cylinder Stack is a revolutionary all-in-one 3D lighting column that combines pixel-mapped rings, powerful wash layers, and sharp center beams in a single stackable cylinder (Ø170mm). Available from 2 to 6 layers (210–690mm height, 33–113 pixels), each section delivers 16W RGB wash, 12-pixel controllable ring, and a 9W RGB center beam—all individually addressable via break-safe WS2818 SPI chips. Direct 110-240VAC, true cascade power & signal, and unlimited vertical splicing make it the most versatile and powerful pixel cylinder system for clubs, concerts, and architectural lighting.
Highlights
→ Pixel + Wash + Beam Combined
→ Unlimited Vertical Stack System
→ True Cascade Power & Signal
→ Break-Safe WS2818 Pixel Chain
→ 2–6 Layer Instant Configurations
| Item NO. | Input Voltage | LED Sources | Size | Layers | Watts | Pixels |
| FEL-V20 A | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
210*170*170mm | 2 Layers | 50W | 33 Pixels |
| FEL-V20 B | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
330*170*170mm | 3 Layers | 80W | 53 Pixels |
| FEL-V20 C | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
450*170*170mm | 4 Layers | 110W | 73 Pixels |
| FEL-V20 D | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
570*170*170mm | 5 Layers | 140W | 93 Pixels |
| FEL-V20 E | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
690*170*170mm | 6 Layers | 170W | 113 Pixels |
| Item NO. | FEL-V20 | Brand | FEL |
| Input Voltage | 110-240VAC | Light Source | RGB LEDs |
| Grayscale | 8 bit | Chips | WS2818 |
| Control Type | SPI Protocol | IP Rating | IP33 |
| Power Socket | 3 Pins Connector | Signal Socket | 3 Pins Connector |
| Materials | PC+ABS+Metal | ||
| Average Lifetime | 50,000 hours | ||
Send Your Inquiry
1. One column does the job of three separate fixtures (pixel bar + wash + beam), saving rigging points, cabling, and budget while delivering richer looks.
2. True unlimited stacking with single power & data feed at the base—build 10-meter towers with just one AC cable and one DMX line.
3. WS2818 chip continues working even if one LED fails, eliminating single-point blackouts that plague normal WS2812 strings in critical shows.
4. Direct 110-240V built-in PSU and cascade design means no external power supplies or data injectors regardless of height.
5. Perfect balance of pixel animation, area wash, and sharp beam in one unit—ideal for designers who refuse to compromise on creative options.
Q: Can I really stack as many layers as I want?
A: NO., the rugular is 2-6 layers.
Q: What happens if one pixel dies mid-show?
A: WS2818 has built-in backup path; the rest of the string and all other effects continue working perfectly.
Q: Do taller stacks need power injection?
A: No. Every Cylinder has fixed well the power suply inside.
Q: Are the wash, pixel ring, and beam controlled separately?
A: Yes—every element has its own channels, so you can run video on rings while strobing beams and washing with solid color.
Q: Can I use my existing Madrix/Art-Net system?
A: Absolutely—just plug the 3-pin signal cable (or RJ45 adapter) and patch as standard SPI pixels.
Q: Is it bright enough for outdoor festivals?
A: Yes—the 9W center beam and 16W wash per layer cut through daylight and smoke easily.
1. Super-club main stage totems: 4–6 layer columns flown around the DJ create moving color walls with piercing beams that sync to every beat.
2. Concert touring backline: lightweight, single-cable stacks replace heavy par cans, LED bars, and beam movers while offering more effects.
3. Festival sky trackers: 10–15 layer towers on bases shoot colored beams dozens of meters high, visible across the entire site.
4. Corporate gala centerpieces: elegant cylinders slowly shift brand colors during dinner, then explode into chase effects for the party portion.
5. TV studio practicals: perfect futuristic set elements that provide wash, accent, and animated graphics from one fixture.
6. Shopping mall atrium features: permanent 20-layer columns gently cycle colors by day and run full video shows for holiday events.
| Item NO. | Input Voltage | LED Sources | Size | Layers | Watts | Pixels |
| FEL-V20 A | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
210*170*170mm | 2 Layers | 50W | 33 Pixels |
| FEL-V20 B | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
330*170*170mm | 3 Layers | 80W | 53 Pixels |
| FEL-V20 C | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
450*170*170mm | 4 Layers | 110W | 73 Pixels |
| FEL-V20 D | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
570*170*170mm | 5 Layers | 140W | 93 Pixels |
| FEL-V20 E | 110-240VAC | Ring: SMD5050 Spot:SMD3535 |
690*170*170mm | 6 Layers | 170W | 113 Pixels |
| Item NO. | FEL-V20 | Brand | FEL |
| Input Voltage | 110-240VAC | Light Source | RGB LEDs |
| Grayscale | 8 bit | Chips | WS2818 |
| Control Type | SPI Protocol | IP Rating | IP33 |
| Power Socket | 3 Pins Connector | Signal Socket | 3 Pins Connector |
| Materials | PC+ABS+Metal | ||
| Average Lifetime | 50,000 hours | ||
Send Your Inquiry
1. One column does the job of three separate fixtures (pixel bar + wash + beam), saving rigging points, cabling, and budget while delivering richer looks.
2. True unlimited stacking with single power & data feed at the base—build 10-meter towers with just one AC cable and one DMX line.
3. WS2818 chip continues working even if one LED fails, eliminating single-point blackouts that plague normal WS2812 strings in critical shows.
4. Direct 110-240V built-in PSU and cascade design means no external power supplies or data injectors regardless of height.
5. Perfect balance of pixel animation, area wash, and sharp beam in one unit—ideal for designers who refuse to compromise on creative options.
Q: Can I really stack as many layers as I want?
A: NO., the rugular is 2-6 layers.
Q: What happens if one pixel dies mid-show?
A: WS2818 has built-in backup path; the rest of the string and all other effects continue working perfectly.
Q: Do taller stacks need power injection?
A: No. Every Cylinder has fixed well the power suply inside.
Q: Are the wash, pixel ring, and beam controlled separately?
A: Yes—every element has its own channels, so you can run video on rings while strobing beams and washing with solid color.
Q: Can I use my existing Madrix/Art-Net system?
A: Absolutely—just plug the 3-pin signal cable (or RJ45 adapter) and patch as standard SPI pixels.
Q: Is it bright enough for outdoor festivals?
A: Yes—the 9W center beam and 16W wash per layer cut through daylight and smoke easily.
1. Super-club main stage totems: 4–6 layer columns flown around the DJ create moving color walls with piercing beams that sync to every beat.
2. Concert touring backline: lightweight, single-cable stacks replace heavy par cans, LED bars, and beam movers while offering more effects.
3. Festival sky trackers: 10–15 layer towers on bases shoot colored beams dozens of meters high, visible across the entire site.
4. Corporate gala centerpieces: elegant cylinders slowly shift brand colors during dinner, then explode into chase effects for the party portion.
5. TV studio practicals: perfect futuristic set elements that provide wash, accent, and animated graphics from one fixture.
6. Shopping mall atrium features: permanent 20-layer columns gently cycle colors by day and run full video shows for holiday events.
Feedback from the Clients Who Used
Can’t find a suitable product?
All of our LED lighting solutions can be customised to your needs. We also offer free, no-obligation consultations, prototype development, sample testing and can assist with your development projects.
Simply call us on with your special requirements and our experts will gladly help you find the best solution for your project.


